老陈配件自有仓库场地3万余平方米,供应 卡特彼勒 390D L 大型液压挖掘机 整机配件及二手机,新旧款配件齐全,欢迎垂询。
卡特彼勒 390D L 大型液压挖掘机 配件及二手机
卡特彼勒 390D L 大型液压挖掘机是卡特彼勒生产制造的吨位(t)为大挖(30-50吨)大型大型液压挖掘机,390D L的整机工作质量(kg)为39000。390D L 标配设备
- FRONT LINKAGE
- ELECTRICAL
-
- Alternator – 75 amp
-
- Lights: Cab interior
-
- Signal/warning horn
-
- Power supply at battery compartment – 24V
- TRACK
- ENGINE/POWER TRAIN
-
- Automatic engine speed control
-
- Automatic swing parking brake
-
- Automatic travel parking brakes
-
- Cat? C18 engine with ACERT? Technology
-
- High ambient cooling, 52° C capability
-
- Side-by-side cooling system with separately mounted AC condenser and variable speed fan
-
- Two speed travel
-
- Water separator with level indicator for fuel line
-
- Electric fuel priming pump
- GUARDS
- GUARDS
-
- Heavy-duty travel motor guards on upper frame
-
- Heavy-duty swivel guard on undercarriage
-
- Heavy-duty travel motor guards on undercarriage
- MISCELLANEOUS OPTIONS
- OPERATOR STATION
-
- Air conditioner, heater and defroster with automatic climate control
-
- Ashtray and 24V lighter
-
- Beverage/cup holder
-
- Coat hook
-
- Console-mounted, electronic-type joysticks with adjustable gain and response
-
- Floor mat
-
- Instrument panel and gauges with full color graphical display
-
- Literature compartment
-
- Neutral lever (lock-out) for all controls
-
- Positive filtered ventilation
-
- Pressurized cab
-
- Retractable seat belt, 75 mm wide
-
- Stationary skylight (polycarbonate)
-
- Sunshade for windshield and skylight
-
- Travel control pedals with removable hand levers
-
- Windshield wipers and washers (upper and lower)
- OPERATOR COMPARTMENT
- UNDERCARRIAGE
-
- Grease lubricated and positive pin retention track
-
- Hydraulic track adjusters
-
- Variable gauge
-
- Steps, four
- OTHER STANDARD EQUIPMENT
-
- Auxiliary hydraulic valve for hydro-mechanical tools
-
- Cat? one key security system with locks for doors, cab and fuel cap
-
- Catwalks, left and right sides
-
- Crossroller-type swing bearing
-
- Drive for auxiliary pump
-
- Mirrors, left and right
-
- S·O·SSM quick sampling valves for engine oil and hydraulic oil
-
- Steel firewall between engine and hydraulic pumps
-
- Wiring provisions for Cat? Product Link, AutoLube System and lighted beacon
发动机
- 发动机型号
- Cat? C18 ACERT? (ATAAC)
- 净功率 - ISO 9249
- 523 hp
- 净功率 - SAE J1349
- 523 hp
- 净功率 - EEC 80/1269
- 523 hp
- 缸径
- 5.71 in
- 冲程
- 6.73 in
- 排量
- 1104.5 in3
- 总功率
- 553 hp
重量
传动
- 最高行驶速度
- 4.5 mph
发动机 - Tier 2/Stage II
发动机 - Tier 3/Stage IIIA
液压系统
- 主系统 - 最大流量(总计)
- 258.89 gal/min
- 回转系统 - 最大流量
- 118.88 gal/min
- 最大正常设备压力
- 5076.3 psi
- 最大行驶压力
- 5076.3 psi
- 最大回转压力
- 3770.9 psi
- 先导系统 - 最大流量
- 23.78 gal/min
- 先导系统 - 最大压力
- 597.56 psi
- 动臂油缸 - 缸径
- 8.27 in
- 动臂油缸 - 冲程
- 89.05 in
保养加注容量
- 燃油箱容量
- 327.57 gal
- 冷却系统
- 26.68 gal
- 发动机机油
- 17.17 gal
- 回转驱动(每侧)
- 5.02 gal
- 终传动(每侧)
- 5.55 gal
- 液压系统(包括油箱)
- 262.85 gal
噪声性能
- 性能
- ANSI/SAE J1166 OCT98
标准
- 制动器
- SAE J1026 APR90
- 驾驶室/防落物保护系统
- SAE J1356 FEB88/ISO 10262
回转机构
- 回转速度
- 5.9 RPM
- 回转扭矩
- 191766 lb ft
履带
- 每侧履带板数量 - 加长型底盘系统
- 51
- 每侧托链轮数量
- 3