老陈配件自有仓库场地3万余平方米，供应 宣工 T165-1 推土机 整机配件及二手机，新旧款配件齐全,欢迎垂询。
宣工 T165-1 推土机 配件及二手机
宣工 T165-1? 推土机是宣工生产制造的功率为120-220推土机。
T165-1
T165-1推土机性能简介
T165-1 Bulldozer
T165-1推土机系半刚性悬挂、机械传动、液压操纵的履带推土机。可用于道路修筑、水电工程、农田改造、港口建设矿山开发及其它建筑工程项目的土石方作业。
T165-1 bulldozer is semi-rigid suspended, power shift, hydraulically controlled and track-type. It is applicable for road construction, water and electricity engineering farmland leveling, port building, mining and other engineering conditions.
主机性能参数
Main specifications
外形尺寸(长×宽×高) 5336×3297×2882 mm (直倾铲)
5336×3726×2882 mm (角铲)
使用质量 16.9t(直倾铲)；17t(角铲)
飞轮功率 121 kW
最大牵引力 132.5 kN（直倾铲）；133.3kN（角铲）
(有效牵引力取决于机重和地面附着性能)
接地压力（使用质量） 64.4KPa
最小转弯半径 3.9 m
最小离地高度 352.5 mm
坡行角度 纵向 30度 横向 25度
单铲容量 4.5 m3(直倾铲);4.9m3 (角铲)
Overall dimensions (L×W×H) : 5336×3297×2882 mm (straight)
5336×3726×2882 mm (angle )
Operation weight: 16.9t(straight);17t(angle )
Flywheel power: 121kW
Max. drawbar pull: 132.5 kN（straight）；133.3kN（angle）
(The efficient force depends on weight and ground surface adherence)
Ground pressure (at operating weight): 64.4KPa
Min. ground radium: 3.9 m
Min. ground clearance: 352.5 mm
Grade ability: Straight 30°
Side 25°
柴油机
Diesel engine
制造厂家： 潍坊柴油机股份有限公司
型号 WD615T1-3B
形式 直列、水冷、四冲程、增压、直喷
缸数--缸径×行程 6-126×130
总排量 9.726L
额定转速 1800 r/min
标定功率 130 kW
最大扭矩/转率 870N·m/1200-1300rpm
燃油消耗量（标定功率） ≤225 g/kW·h
机油消耗量 ≤1.8 g/kW·h
许用海拔 ≤4000m
冷却方式 闭式循环水冷却
启动方式 24V电启动
Manufactured factory: WEIFANG DIESEL ENGINE CO.,LTD
Model: WD615T1-3B
Type: straight line, water-cooled, with four stroke, pressure boost and direct injection
Cylinders Number-bore diameter×travel distance: 6-126x130mm
Displacement: 9.726 L
Rated RPM: 1800 r/min
Rated power: 130 kW
Max. torque 870 N·m/1200-1300 rpm
Fuel consumption (at rated working condition)
225 g/kW·h
oil consumption: 1.8 g/kW·h
Admissible altitude ≤4000m
Cooling method: closed circulation water cooled
Starting method: electrically starting at 24V pressure
制造厂家： 上海柴油机股份有限公司
型号 G128ZG8
形式 直列水冷四冲程增压
缸数--缸径×行程 6-135×150
总排量 12.88 L
额定转速 1800 r/min
标定功率 130 kW
最大扭矩/转速 838 N·m/1260 rpm
燃油消耗量（标定功率） 224 g/kW·h
机油消耗量 0.7 g/kW·h
许用海拔 ≤4000m
冷却方式 闭式循环水冷却
启动方式 24V电启动
Manufactured factory: SHANGHAI DIESEL ENGINE CO.,LTD
Model: G128ZG8
Type: straight line, water-cooled, with four stroke,
Cylinders Number-bore diameter×travel distance: 6-135x150mm
Displacement: 12.88 L
Rated RPM: 1800 r/min
Rated power: 130 kW
Max. torque 838 N·m/1260 rpm
Fuel consumption (at rated working condition)
224 g/kW·h
oil consumption: 0.7 g/kW·h
Admissible altitude ≤4000m
Cooling method: closed circulation water cooled
Starting method: electrically starting at 24V pressure
主离合器与变速箱
Main clutch and transmission
主离合器为常开式，多片湿式粉末冶金摩擦片，液压助力操纵。
变速箱采用常啮合，斜齿轮传动，结合套换档，双杆机械操纵。前进五档，后退四档。
行驶速度：（柴油机1800r/min时理论速度）
前进：一挡 2.5km/h 后退：一挡 3.5km/h
二挡 3.3km/h 二挡 4.6km/h
三挡 5.7km/h 三挡 7.9km/h
四挡 7.5km/h 四挡 10.5km/h
五挡 10.6km/h
The flywheel clutch is constantly disengaged with muti-powder-metal discs, which is operted by hydraulically boosting,.
The transmission is mechanical double levels controlled with constantly meshed helical gears, and coupling sleeve shift. It has five speeds FORWARS and four speeds REVERSE .
Travel speed (in theory 1800r/min engine speed)
Forward Reverse
First speed 2.5km/h First speed 3.5km/h
Second speed 3.3km/h Second speed 4.6km/h
Third speed 5.7km/h Third speed 7.9m/h
Forth speed 7.5km/h Forth speed 10.5km/h
Fifth speed 10.61km/h
转向与制动
Steering and braking
转向离合器为湿式、多片、粉末冶金摩擦片、弹簧压紧、液压分离。
制动器为湿式、浮动、双向带式、脚踏式机械操纵.
The steering clutch is tighten by pressured springs and separated hydraulically with oil-type, multi-powder-metal discs.
The brakes are oil, two-direction floating band with mechanism foot pedals。
最终传动
Final drive
两级直齿轮减速，浮动油封密封，链轮采用组合式，便于维修。
The final drives are double reduction with spur gear and segment sprocket, which are sealed by floating oil seal for easy service.
行走系统
Undercarriage system
行走架为槽钢焊接矩形截面，八字梁型式。支重轮、托链轮、引导轮均装有密封性好、寿命长的浮动油封。
支重轮（每侧）
单边 四个
双边 二个
托链轮（每侧） 二个
引导轮（每侧） 一个
履带型式 单履齿组合式
履带涨紧型式 液压涨紧
节矩 203 mm
履带板数（每侧） 38 块
履带板宽 500 mm
履带接地长度 2570 mm
密封和润滑履带▲
该履带的节距、履带板数、履带板宽与普通的履带相同。
Inner and outer beam of track roller frame are rectangular section “八”frame .Track roller , carrier roller, idler are mounted with long life well sealed Duo-cone floating ring well sealed Duo-cone floating ring seal.
Track roller (each side):
Singe flange 4
Double flange 2
Carrier roller(each side): 2
Idler (each side) 1
Type of track: single grouser combined
Tension mode of track: hydraulic
Pitch: 203mm
Number of shoes(each side) 38 pieces
Width of shoe 500mm
Length of track on ground 2570mm
Sealed and lubricated track ▲
The pitch , numbers and width of track shoes are the same with the general track.
工作装置液压系统
Implement hydraulic system
由装置油泵、液压油箱及各种阀、油缸、滤油器和管路组成。
油泵型式 齿轮油泵
油泵型号 CBF-E100A （反）
系统流量 180 L/min
系统压力 11.76 MPa
单阀（内置）：用于角铲、推煤铲。可实现铲刀油缸的提升、封闭、下降、浮动。
双阀（内置）：用于直倾铲。可实现铲刀油缸的提升、封闭、下降、浮动，同时实现侧倾缸左侧倾、右侧倾、封闭。
双阀（一个内置、一个外置）：用于角铲、松土器。可实现铲刀油缸的提升、封闭、下降、浮动，松土油缸可实现提升、封闭、下降。
三阀（二个内置、一个外置）：用于直倾铲、松土器。可实现铲刀油缸的提升、封闭、下降、浮动，同时实现侧倾缸左侧倾、右侧倾、封闭。松土油缸可实现提升、封闭、下降。
Hydraulic system of the implement
It consists of implement pump , hydraulic tank and various valves , cylinders , filters and lines .
Pump type gears oil pump
Pump model CBF-E100A(reverse)
System output 180L/min
System pressure 11.76MPa
Single valve(built in):used in angle blade, coal pushing blade to control lift, hold, lower, float for the blade cylinder.
Double valve (built in: used in straight blade to control lift, hold, lower. Float for blade cylinder, at same time to realize left tilting, right titling, hold of titling cylinder.
Double valve (one built-in, another at outside): used in angle blade, ripper to realize lift, hold , lower, float for the blade cylinder and to realize lift, hold, lower for the ripper cylinder.
Three valves: (two built-in, one at outside) used in straight blade to realize lift, hold, lower, float for blade cylinder at same time to realize left titling, right tilting, hold for titling for titling cylinder. Ripper cylinder can move to lift. Hold, lower positions.
驾驶室
Cab
噪音低、视野宽阔、可调式的司机座椅，并配备电风扇。
备有以下驾驶室供用户选用
1. 带空调器的驾驶室。
2. 翻车保护司机凉棚。
3．简易司机凉棚。
The cab with adjustable seat features low noise and wide visible range and contains electrical fan.
This following different kinds of cabs as follow can be chosen:
1. Cab with air-conditioner
2. Cab with Rops
3. Simple structure canopy
加注容量
Service refill
加注部位 容量（L）
水箱及柴油机冷却水 60
柴油机润滑系统用油 25
分动箱、主离合器用油 35
变速箱、后桥传动用油 90
最终传动用油（单侧） 24
工作装置液压系统用油 85
柴油箱装柴油 230
支重轮、托链轮、引导轮用油（每个） 0.35
Fill location Capacity(L)
Radiator and diesel engine water: 60
Lubricating system of diesel engine Oil: 25
Flywheel house, main clutch oil 35 ,
Transmission, bevel gear case Oil: 90
Final drive(each side) Oil: 24
Implement hydraulic system Oil: 85
Fuel tank Oil: 230
Idle track roller, carrier roller, front idler(each) Oil: 0.35
推土铲主要参数
Blade specifications
铲刀型式 角铲 直倾铲 推煤铲
Blade Angle Straight Coal pushing
铲刀宽度（Width） 3762mm 3297 mm 4240mm
铲刀高度（Height） 1140mm 1170 mm 1150mm
最大切削深度（Max digging depth）: 400mm 400mm
最大提升高度（Max. ground clearance）:1000mm 915mm 1000mm
垂直倾斜角(Vertical tilting angle): 9° 8.5° 9°
松土器主要参数：
Ripper specifications
松土齿数(Number of shand) 3个 1
长(length) ： 1580mm 1580mm
宽(width)： 2020mm 1090mm
高(Height)： 1236mm 1236mm
最大松土深度： 550mm 550mm
(Max penetration)
最大提升高度： 510mm 510mm
(Max clearance)
注：▲表示可选购物
Note: ▲indicates optional parts
